Single-Use Electromagnetic
Flow Sensor

The first electromagnetic flow sensor, featuring a gamma and autoclave stable flow tube to measure flow of electrically conductive liquids.

  • Flow path with minimal hold-up volume
  • Gamma stable and autoclave stable flow tube
  • Accuracy: 1% of measured value
Category:
1140x708_53874808-1-min

Innovative Flow Tube

Pins on the transmitter contact the electrodes of the flow tube and transfer the signal of the fluid to the electronics, providing a volumetric flow rate. There are no electronic parts in the flow tube itself.

1140x708_53874808-2-min

Full Bore With No Obstruction

Our innovative Electromagnetic Flow Sensors can help to streamline your bioprocessing, allowing for minimal hold-up volume – full bore with no obstruction.

Overview

Features & Benefits

  • Available flow tube sizes are:
    • transmitter 1/4”
      • 1/4” ID: 0.015 l/min to 3 l/min*
    • transmitter 3/8”–1/2”
      • 3/8” ID: 0.07 l/min to 14 l/min*
      • ½” ID: 0.1 l/min to 20 l/min*
    • transmitter 3/4”–1”
      • 3/4” ID: 0.3 l/min to 62 l/min*
      • 1” ID: 0.5 l/min to 75 l/min*
  • Flow path with minimal hold-up volume
  • Gamma stable and autoclave stable flow tube
  • Transmitter can accommodate two flow tubes
  • Accuracy: 1% of measured value
  • Full bore flow path = low pressure drop
  • Factory calibrated, so no need for recalibration
  • Wetted parts materials made from polysulfone material (FDA, USP VI, BSE/TSE)
  • Flow tube is gamma stable up to 50 kGy and autoclave stable up to 120°C

Applications

  • Diafiltration
  • Tangential Flow Filtration (TFF)
  • Virus Filtration
  • Harvesting
  • Fill and Finish
  • Perfusion
  • Nano Filtration
  • Chromatography
  • Sterile Filtration
  • Research
  • Process Development
  • As well as many other applications

Video

Product Comparison

660x452_53872531-10-min
Electromagnetic Flow Sensor
  • Accuracy of 1%
  • Gamma/Autoclave Stable Flow Tube
  • Minimal hold-up volume
  • Accommodates two flow tubes
  • Full bore flow path
  • Factory calibrated
660x452_53872531-8-min
Mass Coriolis
Flow Sensor
  • Accuracy: +/- 1% of flow
  • Gamma stable PEEK sensor
  • For ultra low flow
  • Flow pressure of 30 psi
  • Designed for measuring liquids
  • Materials: Unreinforced polyether ether ketone
660x452_53872531-9-min
Turbine
Flow Sensor
  • Stainless steel flow sensor
  • Flow range: 0.06 – 40 L/min
  • 3 models available
  • High accuracy and repeatability
  • Infrared (IR) turbine rotor reflection
  • Suitable for opaque liquids
Em-tec
Non-Invasive
Flow Sensor
  • Ultrasonic sensor
  • Up to 7 calibration tables
  • Compact Size
  • Waterproof design
  • Up to 50C operating temp
  • Customer specific calibration

Related Products