FlowMaxx Pro 2500 Quaternary
Diaphragm Pump

Our FlowMaxx Pro 2500 Quaternary Diaphragm Pump is an HPNE controller with flow rate capabilities of 0.67L/min to 54L/min.

  • Available with single-use and multi-use pump chambers
  • Optional flow and pressure sensor integration
  • Self-priming design featuring low heat generation
660x452-flowmax_55842808 (2)-min

Single-Use and Multi-Use Pump Heads

Our FlowMaxx Pro pumps were created to work in tandem with our Quattroflow pump heads for both single-use and multi-use designs, allowing them to be calibrated for specific fluids

660x452_53872531 (42)-min

Enlarged Screens And Upgraded Software

With flow rates from 1ml per min to 360L per min in the six pump range, the new FlowMaxx Pro biopharma pumps feature enlarged screens and numerous updates to the previous software to improve ease of use.

Overview

Introducing the evolution of our best-selling pump - the FlowMaxx Pro. This new version is highly accurate and features upgraded pump software, while maintaining the best parts of the original, such as the ability to integrate flow and pressure sensors. The FlowMaxx Pro features calibration of the sensors by the end user, allowing the pump to be adapted for each unique bioprocess. Additionally, alarms have been updated to alert the end user when the sensor is not connected to the pump, avoiding costly mistakes.

Featuring flow rates from 0.67L to 54L per min, the new FlowMaxx Pro has an enlarged HMI screen along with numerous updates to the previous software. Through the main screen, users can run their pump in multiple modes including continuous, time dispense, volume dispense, & PID control, and all of these can be accessed without logging in.

For situations requiring pump maintenance, we have added in the ability to connect to the pump through ethernet - allowing us to remotely diagnose most issues that arise with the permission of the end user and find a solution fast.

Features & Benefits

  • Self-priming
  • High turndown ratio
  • Quick start up and enlarged HMI screen for ease-of-use
  • Ethernet communication for troubleshooting challenges
  • Low heat generation
  • Low pulsation
  • Low cell damage, resulting in high cell viability
  • Low shear and low particle generation
  • Diaphragm failure notification
  • Touch screen features,
    • Input flow rates in liters per minute
    • Priming feature
    • Calibration of sensor by end user 
    • Dispense mode with totalizer
    • Calibration based on customer fluid
  • Optional features,
    • Integration of flow and pressure sensors
    • Integration of a free-standing data logger
    • Integration of scales
    • Pressure shut-off
    • PID control
  • Quiet operation and compact design
  • Durability for continuous processing
  • No metal on metal contact

Applications

The FlowMaxx Pro 2500 is ideal for any single-use or multi-use application requiring low shear liquid transfers, including:

  • Solutions containing proteins (albumin, IgG, clotting factors, monoclonal antibodies, enzymes, vaccines)
  • Solutions of polymers or suspensions (silicon, latex, chromatographic media)
  • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells)
  • Colloidal solutions
  • Suspensions of viruses or phage
  • Lipid nanoparticle production
  • As well as many other applications

Technical Specs

Technical Data: Specifications Quattroflow QF2500
Flow Rate Maximum: Eccentric Shaft 5° 54 LPM
Flow Rate Minimum: Eccentric Shaft 5° 0.67 LPM
Pressure: Temperature of Fluid < 40° C (104° F) 4 bar (58 psi)
Temperature of Fluid > 40° C (104° F) 4 bar (58 psi)
Maximum Temperature: Fluid 80° C (176° F)
CIP 90° C (194° F)
SIP 130° C (260° F)
Autoclave 130° C (260° F)
Pump Speed Range: RPM 25-2200
Suction Lift Dry @ 1200 RPM: Eccentric Shaft 5° 4-4.5 (13.1-14.7)
Priming: Minimum Pump Speed 5° 810 RPM
Minimum Flow Rate @ Free Flow 5° 20 LPM
Volume Specifications: Approximated Volume per

Revolution at Free Output 5°

27mL
Filling Volume Without Connectors 210 mL
Residual Volume <1 mL

Product Comparison

660x452_53872531 (18)-min

FlowMaxx Pro 2500
Diaphragm Pump

  • Flow rate: 0.67L to 54L per min
  • Pressure & flow sensor integration
  • Self-priming design
  • Low shear
  • Low heat generation
  • Low cell damage
660x452_53872531 (20)-min

FlowMaxx Pro 1200
Diaphragm Pump

  • Flow rate: 0.32L to 27.4L per min
  • PID included
  • Pressure sensor option available
  • Flow rate sensor option available
  • Self priming
  • Low cell damage
660x452_53872531 (30)-min

FlowMaxx Pro 4400
Diaphragm Pump

  • Flow Rate: 2.4L to 128L per min
  • Flow & pressure sensor integration
  • Self-priming design
  • Low shear
  • Low heat generation
  • Low cell damage

Related Products