Single-Use Pressure Sensors
Created In A Certified Facility
Our PendoTECH Single-Use Pressure Sensors are manufactured in a FDA Registered, ISO 13485 certified facility, with a Class 100,000 cleanroom.
Accurate Static and Pressure Measurement
Our innovative PendoTECH Single-Use Pressure Sensors can help to streamline your bioprocessing, allowing for the accurate measurement of static and dynamic pressure of gases and liquids in your biopharmaceutical processes.
Overview
Our PendoTECH Single-Use Pressure Sensors measure static and dynamic pressure of gases and liquids in your processes accurately and cost effectively. They are perfect for filtration and chromatography processes, monitoring of glass and disposable bioreactors, filling operations and more. They feature the PendoTECH High Accuracy Pressure (MEMS-HAPTM) chips inside. The sensors connect to monitors via a 12-foot (3.7 m) reusable cable via integral watertight connector. Suitable monitors include PressureMAT monitor/transmitter, a PendoTECH Process Control System, or other pre-qualified third party monitors. They are the alternative low-cost solution for use with tubing to the existing stainless steel pressure transducers on the market.
Features & Benefits
- May be repeatedly cleaned and re-used
- Available with diameters from 1/16 to 1 inch (0.16 to 2.5 cm) inner diameter
- Operating range from -7 to 75 psi (-0.48 to 5.2 bar)
- Unobstructed flow path & no dead legs provides dramatically reduced hold-up volume versus stainless steel transducers or gauges
- 100% tested for accuracy and leaks during manufacturing
- Available in polycarbonate or caustic resistant polysulfone material of construction
- All fluid path materials meet USP Class VI requirements
- Certificate of quality included with lot certification; individual NIST Calibration Certificates are optional
- Compatible with gamma irradiation
Documents
Applications
- Monitoring of bioreactors
- Diafiltration
- Tangential Flow Filtration (TFF)
- Virus Filtration
- Harvesting
- Fill and Finish
- Perfusion
- Nano Filtration
- Chromatography
- Sterile Filtration
- Research
- Process Development
- As well as many other applications
Technical Specs
| Accuracy | Better than +/- 2% of reading in the range of 0 to 6 psi (0 to 0.41 bar) Better than +/- 3% of reading in the range of 6 to 30 psi (0.41 to 2.07 bar) In range of 30 to 60 psi (2.07 to 4.14 bar) typically better than +/- 5% of reading |
| Pressure range | -7 to 75 psi (-0.48 to 5.2 bar) |
| Biocompatibility | All materials in contact with product fluid path meet USP Class VI requirements, both pre and post gamma exposure |
| Manufacturing Environment | FDA Registered, ISO 13485 certified facility; Class 100,000 clean room |
| Gamma Irradiation | Up to 50 kiloGrays |
| Operating temperature | 2° C to 50° C (other ranges with process qualification) |
| Storage temperature | -25° C to 65° C |
| Input/Output impedance | 270 Ohms to 400 Ohms |
| Excitation voltage | 2.5 to 10 volts DC |
| Sensor Output | 0.2584 mV/psi/Volt |
| Natural Frequency | > 200 Hz in saline |
| Connector | Custom molded water-tight 4 pin connector; signal +/- and excitation +/- |
| Packaging | White Tyvek® and clear pouch with easy-open chevron seal; box of 25 sensors in polyethylene bags (except sterile sensors are not in polybags) |
Related Products
PendoTECH PressureMAT Sensor Monitor
Our PendoTECH PressureMAT Sensor Monitor combines a monitor, alarm, and transmitter all in one unit to help accurately measure pressure.